Testimonials:

“Thank you Thomas for introducing methods and sharing your examples to tackle on complex challenges we face at ReDI School. Thank you for your support @rotarykoeln Rotary E-Club Köln”

“Herr Dipl.-Phys. Thomas Fabula ist als wissenschaftlicher Mitarbeiter am Institut für Mikro- und Informationstechnik der Hahn-Schickard-Gesellschaft für angewandte Forschung e.V. tätig und war zunächst mit der Planung des Institutsaufbaus sowie der Konzeption und Realisierung der EDV-Infrastruktur befaßt und hat maßgeblich zum Aufbau des mikromechanischen (MEMS) Systementwurfs beigetragen…” Read More

“I have known Thomas Fabula for almost 40 years. He was a member of my research groups at the Institute of Applied Physics at Bonn and the Hahn-Schickard-Institute for Micro and Information Technology at Villingen-Schwenningen. He worked there in the fields of laser physics and microsystems technology (MEMS), respectively.

I found Thomas to have a careful, systematic and determined way of working, a particularly high degree of initiative and independence combined with a very good grasp and the ability to quickly recognize interdisciplinary contexts. His above-average creativity and ability to work under pressure led to the extraordinarily successful completion of the projects he worked on.”

“I have known Thomas Fabula for almost 40 years. He was a member of my research groups at the Institute of Applied Physics at Bonn and the Hahn-Schickard-Institute for Micro and Information Technology at Villingen-Schwenningen …” Read More

“Thank you Thomas for offering this opportunity to our students at ReDI School NRW! It was engaging, they learnt a lot from your project examples and enjoyed exercises!”

“Dipl.-Phys. Thomas Fabula worked successfully for our company for more than 3 years. This involved the systematic conversion of our company to CAD-automated design and planning work for large-scale plants in the field of the paper and pulp industry, as well as general chemistry …” Read More

“Dipl.-Phys. Thomas Fabula worked successfully for our company for more than three years in the following areas. This involved the systematic conversion of our company to CAD-automated design and planning work for large-scale plants in the field of the paper and pulp industry, as well as general chemistry. Mr. Fabula’s areas of responsibility included in particular

• Development of an overall concept and system-analytical formulation of company-internal workflows for the definition and implementation of a uniform, operational software environment on a company-owned IT system.
• Creation of a program network system for project processing, including CAD software, master data management and parts list generator, as well as automated drawing documentation. This included both the extension of the commercial CAD system to company-specific requirements (e.g. isometry, suspensions, etc.) and the programming of CAD software interfaces for exchange with external programs (post-processors).
• General consultancy (e.g. technical support at the CeBIT trade fair in Hannover), in particular support in hardware and software purchasing decisions concerning company requirements. The complete IT system, with a total of three workstations, was designed by Mr. Fabula.
• Training and familiarization of the planning engineers during a total of six one-week stays in our company. This covered the work processes of producing foundation, steel construction, piping and assembly plans, as well as the production of detailed drawings of fittings suitable for the workshop. This also included the definition and implementation of component and fitting libraries.

In the course of the three years of cooperation, Mr. Fabula has carried out all tasks very conscientiously, independently and to our complete satisfaction. We hope for a further trustful and successful cooperation.”

“Dr. Thomas Fabula has successfully supported us in a number of customer projects. His broad experience and competencies enable him to perform accurate analyses and to derive suitable solutions in a customer-oriented manner …” Read More

“Dr. Thomas Fabula has successfully supported us in a number of customer projects. His broad experience and competencies enable him to perform accurate analyses and to derive suitable solutions in a customer-oriented manner.

One of his strengths is the end-to-end view of the company’s business processes, starting from the business challenges of the different units, via the specific requirements, to the derivation of a comprehensive PLM strategy, as well as the identification and deduction of holistic approaches for the solution finding.

In this respect, he considers the functional and technical requirements (non-functional requirements) for the operational implementation of a capable IT architecture and application landscape, in order to simultaneously define them in a way that is suitable for implementation and to align them on an enterprise-wide basis.”

“Mit Hilfe numerischer FEM-Berechnungen konnte die Auslegung des neuen Bauteil-Designs der Hauptleiterplatine für die Sensor-Elektronik thermisch optimiert werden. Hierbei konnten neue Designvorgaben abgeleitet werden und das untersuchte Bauteil schließlich nach versuchstechnischem Nachweis in die Serienreife überführt werden.”